Compatible With: For Smart Fortwo 453 451 450 2008-2024 Gasoline Car.

Display Function:

Speed(KM/H, MPH), water temperature, voltage, fuel consumption, rotation speed, single mileage, total mileage, driving time, driving direction, time, intake pressure, oil temperature, air-fuel ratio, turbo pressure(some cars will not display), intake pressure, acceleration test, brake test, clear fault code, read data stream.

Please Noted:

Some cars will not display the Turbo Pressure, since not every car has this data when produced.
If you mind that, please do not place an order.

Alarm Function:

Overspeed alarm, speed alarm, water temperature alarm, voltage alarm, fatigue driving reminder.

Packing List

1 x F10 HUD
1 x 2M OBD Cable
1 x English Manual
1 x Packing Box

FAQ

1.Can't work normally

The first time installation requires reading the vehicle protocol and will takes 3 minutes,please wait patiently:

--Put the vehicle in "P"or "N" gear, pull up the handbrake and start the vehicle to ensure that the vehicle is in an idle state;
--Connect the hud to your car obd2 socket;
--Turn on the power switch of the hud, the system will automatically scan the vehicle data, it takes about 3 minutes, please wait patiently;
--When screen displays the water temperature and fuel consumption of the vehicle, the initialization is complete, and it can be used normally.

2.No display on the screen, no power.

Check whether the OBD cable is loosely connected, try to connect it several times. If it still does not work, please change another car to test, and analyze whether the OBD interface of the car is broken. If the OBD interface is broken, please repair the OBD interface and then connect the machine again.

3.Unable to shut down or automatically start and stop with the car

Enter system setting mode, find “shutdown mode”
System auto shutdown mode (default: 1)
--1.It is intelligent mode. If the engine speed and vehicle speed are both 0, the system will shut down automatically.
--2.It is a normal mode. If the vehicle data cannot be read correctly, the system will shut down automatically. It is recommended that vehicles with automatic start and stop should use this shutdown mode.